Hamilton Beach HBB250, Руководство по эксплуатации

Страница: 3 / 32

3
For assistance or replacement parts, call our Technical Service number:
866-285-1087 or 910-693-4277
8 a.m. – 5:00 p.m. EST Monday – Friday
www.commercial.hamiltonbeach.com
Technical Service
Cut Hazard
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace lid
and filler cap and run on LOW speed for 2 min-
utes. Empty container.
2. Wipe exterior with soft cloth dampened with sani-
tizing solution.
3. Immerse lid and filler cap in sanitizing solution for
2 minutes.
4. Place empty container on base and run on HIGH
speed for 2 seconds to remove any moisture from
the cutter assembly.
5. When ready to use , rinse with clean water.
Sanitizing
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
Replacement Parts
44 oz. polycarbonate container 6126-250
32 oz. Stainless Steel container 6126-250S
Cutter assembly (Rubber Clutch) 98250
Part Description Part Number
The following components are subject to wear and should be replaced at least
yearly. We recommend keeping a replacement container and cutter on hand.
Safety Alert Symbols
The following safety alert symbols are used throughout
this manual to alert you to the safety hazards described
below.