5
To Program
Automatic Brew
Tips for
Best-Tasting Coffee
• All coffees are made from either arabica beans or robusta beans,
or some combination of both. Arabica beans are slightly more
expensive, but tend to produce better-tasting coffee.
• Ground coffee will become stale much faster than whole beans.
If buying preground coffee, chose a package with the latest
expiration date or a smaller quantity.
• If grinding whole beans, set your coffee grinder on a fine/medium
grind. This will yield the best-tasting grounds. Try to use freshly
ground coffee within about a week of grinding.
• Using a water filter, filtered water, or bottled water will yield better-
tasting coffee than tap water.
• Use approximately 1 tablespoon (5 g) of grounds for each cup of
coffee being made. To avoid overflow, use about 1/3 less grounds
when brewing decaf or flavored coffees.
• Make sure your coffee maker is clean. See “Care and Cleaning”
section.
NOTE: White LED comes on to indicate
PROGRAM is activated. White LED light
goes off when the unit begins to brew at the
preprogrammed time.
1. Choose a brew option.
2. Press and hold the PROGRAM button until
the PROGRAM light flashes.
3. With PROGRAM light flashing and START
TIME displayed, press HOUR and MIN
buttons to set the desired brew time.
4. After 2 seconds, the light will stop
flashing. Programmed time will be stored
and the current time will be displayed.
5. Press and release PROGRAM button again
to activate automatic brew. PROGRAM
light comes on.
