7
6
Sharpening Knives
1.
Place cutting edge of knife in the
knife slot located on the side of the
can opener.
2.
Draw the knife blade through the
slot several times.
NOTE:
Serrated blades should never
be inserted into this unit.
Hints for Best Use
• The can opener will easily open all standard size cans.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
Cleaning Your Can Opener
1.
Unplug the unit from the electric outlet.
2.
Remove can opener from mounting bracket by pushing
up on opener release tab. Slide the opener back and off
the mounting bracket.
3.
To clean the unit, wipe with a clean, damp cloth.
Do not immerse unit in water.
How to Use Your Can Opener
(cont.)
4.
Hold Switch down in ON position.
Opener will hold can and sever lid
as long as Switch is held down.
Hold Switch down for only 1 full
can rotation.
(See Figure 6.)
5.
To remove can, support can and
move Switch to OFF position.
Hold lid on can and pull can down
and away from lid opener.
6.
Remove lid from top of can
(see
Figure 8).
Always check can
contents to remove any pieces
of label or metal shavings.
Figure 6
Figure 8
Figure 7
1 rotation
only
840105800 ENv05.qxd 12/4/02 9:47 AM Page 6
