How to Operate
1.
Make sure the unit is unplugged.
Place base on clean, dry surface.
2.
Hook front housing onto base.
3.
Place ice shaving chamber in front
housing and
ensure it is
seated on the
shaft.
4.
Twist shaft in direction of arrow to
lock into
position.
5.
Place mixing paddle in bowl.
6.
If mixing shaved ice with other
ingredients, place ingredients in
bowl.
NOTE:
Use serving size markings on
bowl as a guide for appropriate ice
and liquid levels.
7.
Slide bowl into place on base and
turn clockwise
until it stops
at post. This
will allow the
mixing paddle
to mix ice and
ingredients
once operation
begins.
NOTE:
The cup guide on base may
be used to shave ice into bowl or cup
other than bowl supplied.
8.
Turn selector knob to desired
setting. Slushie setting produces
finer ice. Snow Cone setting
produces coarser ice.
9.
Place ice in ice shaving chamber.
Do not fill
above top rim of ice
shaving chamber.
10.
Plug cord into outlet.
11.
Place lid on front housing and turn
clockwise to
lock interlock
switch
(Power Start/
Stop). The
unit will start
and begin
to shave
ice.
NOTE:
It may be
necessary to open lid occasionally
to redistribute ice.
4
WARNING
Cut Hazard
• Avoid contact with shaving blade.
• Do not use if shaving blade is loose,
cracked, bent or damaged.
12.
Turn lid counterclockwise to stop.
DO NOT shave ice above top
ICE line.
13.
To remove bowl, turn counter-
clockwise, slide out and serve
Icy Treat.
840154601 ENv01.indd 4
840154601 ENv01.indd 4
12/14/12 10:04 AM
12/14/12 10:04 AM
