Hamilton Beach 31220, Инструкция по использованию и уходу

Страница: 6 / 36

6
Special Features:
Cooling Fan: Will run for a short period of time to cool Control Panel
and Oven after each cooking cycle.
Easy Cooking Cycle Adjustments: Temperature and Time can be
adjusted during cook cycle. Press Cooking Time/Slices or Temperature/
Shade and turn Control Knob to adjust Time or Temperature. Selected
display will flash and turn solid and cooking cycle continues.
Sleep Mode: While plugged in but not in use, Oven is in Sleep Mode.
Cooking Function button is lit. To bring Oven out of Sleep Mode, press
any button or turn Control Knob. If Oven has not been started after
reactivating, Oven returns to Sleep Mode.
Capacitive Touch Control Panel: Capacitive touch Selection buttons
respond to a light touch or press to activate. The four circles on Control
Panel indicate the selection buttons’ locations for Cooking Function,
Cook Time/Slices, Temperature/Shade and Airfry Presets. Once a setting
is active, turning Control Knob adjusts setting.
Stay On Feature: Stay On feature is available on bake, airfry (including
all preset modes), convection, and dehydrate mode. When the Stay
On Feature is activated, “On” will appear in timer display. Set Stay On
feature for bake/ airfry/convection/dehydrate: Press Cook Time/Slices,
turn Control Knob to between “00:01” (1 minute) and “02:00”
(2 hours); for dehydrate function, “24:00” (24 hours). Time display
shows “On”. Press Control Knob to end Stay On.
Turning Oven Off: Press Control Knob anytime during any cooking
cycle to turn Oven off. Cooling fan will continue to run for a short period
of time to cool the Control Panel and Oven after Oven is turned off or
cooking cycle finishes. The fan automatically turns off when cooling
cycle is complete.
Setting Fahrenheit or Celsius: Fahrenheit is default temperature setting.
To change to Celsius, press and hold Temperature/Shade button; C will
appear in display. To go back to Fahrenheit, press and hold again to
return to Fahrenheit; F will appear in display.
Bake/Airfry/Convection/Dehydrate Cooking Functions: Oven begins
to preheat when Control Knob is pressed to start cooking cycle. During
preheat:
• The temperature display is red to indicate the Oven is heating. The
temperature display will toggle between actual temperature and set
temperature. When actual temperature reaches set temperature,
the display shows set temperature. Oven will beep to signal that set
temperature is reached.
NOTE: Oven can be set to preheat without setting a cook time. Once
Oven beeps to notify set temperature is reached, cook time can be
entered.
• After beep, to set time press Cook Time/Slices and turn Control Knob
to desired time. Press Control Knob to start time countdown.
• When timer reaches 00:00, Oven beeps 3 times to signal countdown
time is complete. Check food for doneness. If desired, add more time
or press Control Knob to turn Oven off.
Toast/Broil Functions: There is no preheat cycle. Timer immediately
counts down when Control Knob is pressed.
Airfry Presets: Review “Cooking Functions Chart” on page 9 for Time
and Temperature default settings.
• All Airfry Presets can be adjusted as desired but will return to default
setting when cooking cycle ends.
• A light coating of oil can enhance browning and crispiness, though
this is not required for frozen foods. Use an oil sprayer or a nonstick
cooking spray to keep it extra light, or pour a little oil into a bowl, add
food, and toss till food is coated.
Know Your Control Panel
(cont.)