Hamilton Beach Commercial HMI Series, Руководство по эксплуатации

Страница: 3 / 24

3
25.
SWITCH OFF ( ) before withdrawal from the
mixture.
26.
DO NOT allow water/mixture to enter the
motor housing slots when using or cleaning.
27.
Do not hold blender by the blender
attachment shaft or whisk gear box. Only
position hands on attachment grips and base
handle.
28.
Do not leave blender unattended when
operating in continuous on mode.
29.
Do not attempt to defeat interlock
mechanisms.
SAVE THESE INSTRUCTIONS
w
WARNING
Pinch, Cut, and Crush Hazard
Make sure that the blender is off and
unplugged before installing or removing
attachments and parts.
Blades are sharp! Use extreme care when
handling.
Only hold blender in designated gripping
areas. See instruction details.
DO NOT reach or insert utensils into the
container while the blender is running.
Failure to follow these instructions can
result in broken bones, cuts, or other
serious injuries.
w
WARNING
Electrical Shock Hazard
Do not use an extension cord.
Do not put motor housing, cord, or
plug in water or any other liquid.
Failure to follow these instructions can
result in death, fire, or electrical shock.
This Operation Manual provides the user with instructions to safely operate, clean, and
maintain the Immersion Blender. It is intended to facilitate use of the appliance (herinafter
referred to as “appliance”). It is mandatory that all users in charge of installing, commissioning,
operating, maintaining, repairing, or dismantling the machine read this manual and be properly
trained for all required responsibilities. This manual must be carefully kept at the workplace
and be readily available for the user to consult.
The applicable safety, hygiene, and environmental standards/regulations enforced in the
country where appliance is operated must always be applied during use.
w
WARNING
Entanglement Hazard
Keep clear of the rotating whisk.
Tie back long hair and loose clothing.