More information
| www.hameg.com
7
6 HAMEG INSTRUMENTS
| HMO3000 SERIES
Always a MSO
Optional: Logic probe HO3508
❙
Logic probe HO3508 fi ts to all
HMO series oscilloscopes
(also available as double pack HO3516)
❙No hardware lock to a specifi c device
❙8 logic channels available
on each logic probe
❙Signal threshold adjustable
for each logic pod
Specifi cations HO3508
Channels
8
Input impedance
100 kΩ || <4 pF
Max. input frequency
350 MHz
Max. input voltage
40 V (DC + peak AC)
Measuring category
CAT I
Cable length
approx. 1 m
HAMEG is offering the new HMO3000 series exclusively as a mixed-signal oscilloscope. The great
advantages of these instruments are best illustrated by taking a look at how ADCs (Analog Digital
Converter) or DACs (Digital Analog Converter) are integrated. These transformer modules include
an analog signal on the one side and a digital signal on the other side. As with HAMEG's new
HMO3000 series, MSOs allow developers the assessment of the time component for both signal
types on one monitor. As shown in the image below the latency time of a DAC can be determined
with one simple cursor measurement. Therefore a MSO allows developers to devote their full
attention to the circuit without having to waste energy on the measurement setup.
HAMEG is focusing resolutely on the increasing signifi cance of the mixed-signal oscilloscopes.
Consequently, all HAMEG HMO oscilloscopes are full-scale MSOs, even the smaller models with a
bandwidth as low as 70 MHz. As a result, HAMEG customers will not need to speculate if they
should purchase an instrument with or without logic connectors. As the MSO functionality is
invariably included, all instruments correspondingly offer a secure future. It is also unnecessary to
initially activate the mixed-signal functions via software options, as is the case with other suppliers.
The mixed signal functionality is always included in the HMO3000
series with no software option being necessary to unlock it.
14 bit DAC signal change
HAMEG logic probes
are not linked to a specifi c
instrument serial number.
This allows their use with all
digital HAMEG oscilloscopes
in the HMO series.
Mixed Signal
Mixed Signal
