www.hameco.eu
hameco
10
3. APPLICATION INSTRUCTIONS
3.1 Remote Controller
3.1.1 Key Instructions
1. Standby Key:
After pressing for 3 seconds, the camera will be in standby mode. Press again
for 3 seconds, and the camera will self-test again and go back to the HOME po-
sition. Note: If preset 0 is set, and there is no operation within 12 seconds, the
2.Camera Address Selection:
Select the camera address.
3.Number Key:
Set or call 0-9 presets.
4. *, # Key:
Key combination use:
is on, release hands. Power on the camera again, it will successfully be paired
with the WR controller.
is on, release hands. Power on the camera again, it will cancel pairing with the
WR controller.
5. Focus Control Key:
Auto Focus: Enter into auto focus mode.
Manual Focus: The camera focus mode is manual.
Lens near
7.Set or Clear Preset key:
8. Electronic Pan/Tilt Control Key:
Press
Key : Up
Press
Key : Down
Press
Key : Left
Press
Key: Right
“HOME” Key: Return to the middle position or enter into the sub-menu
9. BLC Control Key:
HV-45 User Manual
