15
Editing the User Database
Upon initialization, the Users Database is blank
and a
Primary Administrator
account must be
created.
Additional Users
with three different
permission levels may also be entered. Click
Show Passwords
to make the passwords visible
on the screen as they are entered into the
database (see Figure 20).
Permission Levels are as follows:
•
Primary Administrator
(single account)
This user has access to all program features
and has permission to add and remove users.
•
Backup Administrator
This user has the same access to program
features as the Primary Administrator. Has
permission to add and remove
Additional
Users
only. Backup Administrators
cannot make changes to the Primary
Administrator account.
•
Power User
This user can access to all program features,
but does not have permission to access the
Users Database.
•
Operator
This user has access to basic configuration
features but does not have permission to
Update Firmware
or
Calibration Data and
Critical Configuration
parameters.
•
User Not in Database
This user has access to
Target Status
and
Diagnostic Readout
only.
To edit the Users Database:
1.
Enter the Primary Administrator’s User
Name and Password (twice)
2.
Enter any Additional User Accounts as
needed.
3.
Click
SAVE
when you are finished adding users.
Figure 21 provides an example of five user accounts, including one Primary Administrator, one Backup
Administrator, one Power User and two operators.
Figure 20 –
Users Database – Initialization
Figure 21 –
Example of
Users Database with 5 User Accounts
