Hamamatsu Photonics ORCA-Fire C16240-20UP страница 5 Скачать руководство пользователя

Страница: 5 / 68

Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3

AC adapter

When unplugging the power supply cord, do not pull on the cord. Remove the

plug from the outlet to avoid causing electric shock or fire.

When unplugging the power supply cord, do not pull on the cord, but remove the

plug from the camera to avoid breakdown of the AC adapter

or the camera.

Connecting and disconnecting cables

Always turn off the power supply of the peripheral device before connecting and

disconnecting cables.

Mounting the camera

When mounting the camera to a tripod or other fixture, use the base plate. Be

careful that the mounting screw does not enter more than 8 mm from the surface

of the base plate. Screwing it in further can impair normal operation.

Mounting the C-mount Lens (C16240-20UP)

Be careful not to screw the lens more than 7 mm into the C-mount of the camera.

Doing so can scratch the protective glass. (Some wide-angle lenses in particular

can have a thread of 7 mm or more.)

When using F-mount (C16240-20UP01)

An F-mount adapter can be subject to light leaks due to the mating flange

mechanism. When used with a high sensitivity, long exposure camera, such the

ORCA-Fire, it may be possible to detect photons originating from the F-mount

light leakage. In this case, it is recommended to create a dark condition for the

camera such as a dark room, dark box or wrap the F-mount flange area with a

dark cloth. Be careful maintain the clearance distances in the venting areas of

the camera for proper cooling air flow.

Shipping precautions

When transporting the camera by truck, ship, airplane, etc., wrap it securely in

packaging material or something similar.

Strong impact

Do not subject the camera to strong shocks (such as dropping it). Doing so can

damage the camera.

Operating environment

This camera is designed and tested for use in an industrial environment. If this

camera is used in residential areas, EMI (electro-magnetic interference) may

occur. This camera must not be used in residential areas.

Disposal

When disposing of the camera, take appropriate measures in compliance with

applicable regulations regarding waste disposal and correctly dispose of it

yourself, or entrust disposal to a licensed industrial waste disposal company.

any case, be sure to comply with the regulations in your country, state, region or

province to ensure the camera is disposed of legally and correctly.

Содержание ORCA-Fire C16240-20UP





































































Результаты поиска

Содержание ORCA-Fire C16240-20UP

Отзывы:

Похожие инструкции для ORCA-Fire C16240-20UP

Бренды по названию

Популярные бренды

Hamamatsu Photonics ORCA-Fire C16240-20UP, Инструкция по эксплуатации

Результаты поиска

Содержание ORCA-Fire C16240-20UP

Отзывы:

Похожие инструкции для ORCA-Fire C16240-20UP

Бренды по названию

Популярные бренды