Hamamatsu Photonics ORCA-Fire C16240-20UP страница 35 Скачать руководство пользователя

Страница: 35 / 68

Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3

11-1-6 CAMERA OPERATION MODES

11-1-6-1 Free running mode

The camera has Free running mode which the exposure and readout timing can be set and controlled

by an internal microprocessor. Free running mode has normal readout mode (in which the exposure

time is longer than the 1 frame readout time) and electrical shutter mode (in which the exposure time is

shorter than the 1 frame readout time). These readout modes are automatically switched depending on

the exposure time setting.

•

Contact a Hamamatsu subsidiary or your local distributor for the detail of the timing information.

(1) Normal readout

The normal readout mode is suitable for observation, monitoring, field of view and focus

adjustment, and animation because it can operate the fastest frame rate with full resolution. In

case of 16 bit digital output, maximum 115 fps with CoaXPress and 15.7 fps with USB can be

achieved respectively.

In addition, the exposure time can be extended to collect more signals and increase the signal to

noise ratio if the object is dark. In the normal readout mode, the exposure time is the same or longer

than the 1 frame readout time. In this mode, the frame rate depends on the exposure time, and it

becomes frame rate = 1 / exposure time. The maximum exposure time is 10 s.

Internal exposure timing setting

0(H)

1(H)

・　

N-1(H)

N(H)

Sensor readout

CoaXPress data output

USB data output

Global exposure timing output

Any-row exposure timing output

Figure 11-2

Содержание ORCA-Fire C16240-20UP





































































Результаты поиска

Содержание ORCA-Fire C16240-20UP

Отзывы:

Похожие инструкции для ORCA-Fire C16240-20UP

Бренды по названию

Популярные бренды

Hamamatsu Photonics ORCA-Fire C16240-20UP, Инструкция по эксплуатации

Результаты поиска

Содержание ORCA-Fire C16240-20UP

Отзывы:

Похожие инструкции для ORCA-Fire C16240-20UP

Бренды по названию

Популярные бренды