Hamamatsu Photonics C9300-201 Скачать руководство пользователя

Страница: 48 / 48

C9300-201 Ver.1.2

17. CONTACT INFORMATION

Japan

HAMAMATSU PHOTONICS K. K., Systems Division

812 Joko-cho, Higashi-ku, Hamamatsu City, 431-3196, Japan
Telephone (81) 53-431-0124, Fax: (81) 53-435-1574
E-mail:

[email protected]

U.S.A. and Canada

Hamamatsu Corporation, Systems Division

360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A.
Telephone: (1)908-231-1116, Fax: (1)908-231-0852
E-mail:

[email protected]

Germany

Hamamatsu Photonics Deutschland GmbH

Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany
Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
E-mail:

[email protected]

France

Hamamatsu Photonics France S.A.R.L

19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex,
France
Telephone: (33) 1 69 53 71 00, Fax: (33) 1 69 53 71 10
E-mal:

[email protected]

United Kingdom

Hamamatsu Photonics UK Limited

2 Howard Court, 10 Tewin Road, Welwyn Garden City Hertfordshire
AL7 1BW, United Kingdom
Telephone: (44) 1707-294888, Fax: (44) 1707-325777
E-mail:

[email protected]

North Europe

Hamamatsu Photonics Norden AB

Smidesvagän 12, SE-171 41 Solna, Sweden
Telephone: (46) 8-509-031-00, Fax: (46)8-509-031-01
E-mail:

[email protected]

I taly

Hamamatsu Photonics Italia S.R.L.

Strada della Moia, 1/E 20020 Arese (Milano), Italy
Telephone: (39) 02-935 81 733, Fax: (39) 02-935 81 741
E-mail:

[email protected]

The contents of this manual are subject to change without notice.

The unauthorized reproduction or distribution of parts or all of this manual is prohibited.

If one of the following problems occurs, please contact Hamamatsu Photonics.
(See the CONTACT INFORMATION.) We will deal with the problem immediately.

Some contents of the manual are dubious, incorrect or missing.

Some pages of the manual are missing or in the wrong order.

The manual is missing or dirty.

Содержание C9300-201

















































Результаты поиска

Содержание C9300-201

Отзывы:

Похожие инструкции для C9300-201

Бренды по названию

Популярные бренды

Hamamatsu Photonics C9300-201, Инструкция по эксплуатации

Результаты поиска

Содержание C9300-201

Отзывы:

Похожие инструкции для C9300-201

Бренды по названию

Популярные бренды