C11440-42U/C11440-42U01 Instruction manual_Ver.1.1
13. SPECIFICATIONS
13-1 CAMERA SPECIFICATIONS
(1) Electric specifications
Imaging device
Scientific CMOS image sensor FL-400
Effective number of pixels
2048 (H) × 2048 (V)
Cell size
6.5 µm (H) × 6.5 µm (V)
Effective area
13.312 mm (H) × 13.312 mm (V)
Full well capacity (typ.)
30 000 electrons
33 ms
Readout speed
10 ms (Rapid Rolling Mode)
1.5 electrons (typ.)
Readout noise (r.m.s)
1.9 electrons (typ.) (Rapid Rolling Mode)
Dynamic range *
1
33 000 : 1
Cooling method
Peltier Forced air-cooled
Cooling temperature
+ 10 °C (Ambient temperature: + 10 °C to + 30 ºC)
at Full resolution
30 frame/s
at 1024 lines
at center position
60 frame/s
at 8 lines
at center position
7696 frame/s
Frame rate
at Horizontal 512 pixels at
8 lines at center position
25 000 frame/s
(Rapid Rolling Mode)
Normal readout mode
1×1
Binning readout mode
2×2,4×4 (Digital binning) *
2
Readout mode
Sub-array readout mode
Configurable for each vertical 8
pixels and horizontal 512 pixels.
Dark current
0.6 electron/pixel/s (at Cooling temperature: + 10 °C)
3 ms to 10 s
Free running mode
1 ms to 10 s (Rapid Rolling Mode)
129.99 µs to 10 s
Free running mode
/ Sub-array mode
40 µs to 10 s (Rapid Rolling Mode)
3 ms to 10 s
Exposure time
External trigger mode
1 ms to 10 s (Rapid Rolling Mode)
A/D bit
16 bit
Linearity
Less than 3 %
Conversion factor
0.46 electrons/count (typ.)
Dark offset
100 counts (at Normal readout)
External trigger Function
Edge trigger / Global reset edge trigger
Level trigger / Global reset level trigger
Synchronous readout trigger
Start trigger
External signal input
External input (SMA connector)
External trigger input level
3.3 V LVCMOS level
External trigger output level 3.3 V LVCMOS level
38
