1
Digital radiography system, dental C10819 Series
Hamamatsu Photonics K. K.
Precautions when using (safe and secure) Electronic Medical Equipment
1. User must read the manual and learn how to use.
Or please use it under the supervision of user who
knows usage.
2. Take care of the following while installing the equip-
ment. Install in a dry place.
(1) Keep in a place where there are no adverse
effects due to atmosphere containing pres-
sure, heat, humidity, air passage, direct sun-
light, dust, salt content or sulfur content.
(2) Take care of the safety status such as the
angle of inclination, vibrations, shocks (includ-
ing handling time), etc.
(3) Do not use in places where chemicals are
stored or where there is generation of gases.
3. Take care of the following before using the equip-
ment.
(1) Confirm that the equipment is running properly
by checking the switch position, display cate-
gory etc.
(2) Confirm that all the cables are correctly and
safely connected.
(3) Take sufficient precautions since using the
equipment widely would risk in errors in the
precise measurements and might create dan-
gers.
(4) Recheck the external circuits that are directly
connected to the patients.
4. Take care of the following while using the equipment.
(1) Do not exceed the necessary time for mea-
surement.
(2) Constantly monitor that there are no abnor-
malities in the entire equipment and to the
patients.
(3) In case any abnormalities are detected in the
equipment or the patient, take appropriate
measures such as stopping the operation of
the equipment while the patient is in a safe
state.
5. Take care of the following after using the equipment.
(1) Shut-off after returning the operational
switches to the original positions as before
according to the determined procedures.
(2) When removing the cords, do so without
applying unreasonable extra strength.
(3) Take care of the following incase storage is
necessary.
I. Store in a dry place.
II. Store in places where there are no adverse
effects due to atmosphere containing pres-
sure, heat, humidity, air passage, direct
sunlight, dust, salt or sulfur.
III. Do not store in places where chemicals are
stored or where there is generation of
gases.
(4) Align and arrange after cleaning the accesso-
ries, cords, etc.
(5) Always clean the equipment so that there are
no breakdowns when using it again.
6. In case of a breakdown, do not fiddle on your own
discretion,
perform the appropriate display and entrust the
repairing to a technician.
7. Do not modify the equipment.
8. Maintenance check
Always check the equipment and the parts.
When using equipment that has not been used for a
while, confirm that the equipment is operating nor-
mally and safely before reuse it.
9. Others
(1) Operate properly in accordance with the
Instruction Manual.
