5
1. Introduction
Thank you for choosing the Wireless Laser Presenter.
These operating instructions contain information for
operating your presenter. Please keep these instructions
in a safe place for future reference.
2.
Package contents
• Presenter
• USB receiver with integrated MicroSD card reader
• 2x AAA batteries
• Operating
instructions
3. System requirements
• Windows 2000/XP/Vista/ 7
• MAC OS 9.0 or higher
4. Hardware installation
4.1. Inserting the batteries
a) Remove the battery compartment cover and insert
the batteries into the battery compartment, observing
the
polarity.
b) Replace the battery compartment cover and make sure
that it is securely closed.
4.2 Connecting the USB receiver
a) Connect the USB receiver to an unused USB port on
your PC or laptop.
b) The operating system automatically detects and
installs the USB receiver. This process may take a
few
seconds.
c) Switch on the presenter. To do this, press the Power/
Mode button (on/off switch) for approx. 2 seconds.
The LED lights up green.
Note
If the presenter is still not working, proceed as follows:
a) Connect the USB receiver to an unused USB port on
your PC or laptop.
b) Make sure that the presenter is on.
c) Briefl y press Connect button A (fi g. 4) on the USB
receiver; the LED starts fl ashing.
d) Press Connect button B on the rear side of the
presenter until the LED on the receiver stops fl ashing.
The presenter is now ready for use.
(fi g.1)
(fi g.2)
(fi g.3)
Laser indicator
Keyboard
Mouse
Media Player
On/off switch
Laser pointer
(fi g.4)
Connect button A,
status LED
Connect button B
MICRO SD card
reader
Battery
compartment
cover
g
Operating Instruction
00052407man_de_en_fr.indd Abs2:5
00052407man_de_en_fr.indd Abs2:5
29.03.10 15:24
29.03.10 15:24
