Hama Soundchest, Руководство по эксплуатации

Страница: 5 / 78

4
4.5 Automatic Bluetooth
®
connection (after
successful pairing)
• Make sure that your
Bluetooth
® capable terminal
device is on and
Bluetooth
® is activated.
• Make sure that the speaker is located within the
Bluetooth
® range of max. 10 metres.
• Switch on the speakers as described in
4.1
Switching the product on and off.
• After successful connection, the status LED (4) will
light up in blue. An acoustic signal confirms that
connection was successful.
Note – Connection impaired
• After the speaker and terminal device have been
paired, a connection is established automatically.
If the Bluetooth
®
connection is not established
automatically, check the following:
• Check the
Bluetooth
® settings of your terminal
device to see whether Hama Soundchest is
connected. If not, repeat the steps listed under
Bluetooth
® pairing.
• Check whether your terminal device and the
speaker are less than 10 metres apart. If not, move
them closer together.
• Check whether obstacles are impairing the range.
If so, move the devices closer together.
• Check whether the audio cable is connected to the
speaker. If so, disconnect it.
4.6 Audio playback (via Bluetooth
®
)
Start and control audio playback on the connected
terminal device accordingly. Alternatively, audio
playback can also be controlled on the speaker (if the
connected device supports this function).
• Press the function button (1) to start or pause
audio playback.
• Swipe from left to right or right to left on the
touchpad to go to the next or previous track.
• Turn the rotary control to the left or right to increase
or decrease the volume.
4.7 Hands-free function
You can use the speaker as a hands-free set for your
mobile phone. For this function, the mobile phone must
be connected to the speaker via
Bluetooth
® .
• Press the function button (1) once to answer an
incoming call.
• Press and hold the function button (1) for approx.
2 seconds to reject an incoming call.
• You can put a call on hold by pressing and holding
the function button (1) for approx. 2 seconds.
• Press and hold the function button (1) again to
continue the call.
• During a call, press the function button (1) once to
end the call.
• Press and hold the function button (1) for approx.
2 seconds to call the most recently dialled number.
Note – Call quality
To increase the call quality, make sure that you are
near the speaker with your mobile phone during the
call.
4.8 Equaliser
The equaliser (7) enables optimum adjustment of
the sound to suit the requirements both indoors and
outdoors. Pressing the button will change the sound
mode; the active mode (Indoor/Outdoor) is displayed on
the sound mode status LED (5).
5. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com