4
1) Bass control
2) Volume control
3) Speaker connection cable
4) Connection cable for controls
5) Speaker sockets (red/white)
6) Sockets for connecting cable for sound source
(red/white)
7) Socket for cable for controlling controls
8) On/off switch
9) Power connection cable
10) Connecting cable for sound source
• Using connection cable (3), connect both satellites
to the speaker sockets (5) on the subwoofer
• Connect the connection cable for controlling the
controls (4) to the socket (7) on the subwoofer
• Connect the supplied connecting cable (10) to the
sockets (6) on the subwoofer and on the sound
source
• Connect your sound system to the power supply.
Make sure to check the voltage before switching on
the system.
• Finished.
Safety instructions
Please observe the safety remarks in the operating
instructions for the PC!
• The speakers should only be transported in their
original packaging, or in other suitable packaging
which protects them from jolts and knocks.
• Condensation can arise when speakers are tran
ferred from a cold environment into a warm room.
Allow the speakers to climatise to the ambient
temperature, and ensure that they are absolutely
dry, before they are used.
• Ensure that the local mains voltage is 230 V/50 Hz.
• Ensure that the mains socket is freely accessible.
• The speakers’ ON/OFF switch does NOT disconnect
the speakers from the mains! The mains plug has to
be withdrawn from the mains socket to disconect the
speakers.
• Do not use the speakers in moist rooms.
• Conduct the cables in such a manner that they can
not become a hazard (tripping) or be damged.
Observe the corresponding remarks in the instruc-
tions when connecting the speakers.
• Ensure that no objects (e.g. metal paper clips, etc.)
or liquids can enter the interior of the speakers
(electric shock, short circuit).
• Immediately switch off the speakers and disconnect
them from the mains in emergencies (e.g. damage to
speaker case, controls or power supply line, or in the
event of foreign bodies or liquids entering the
speakers).
• Any repair work must be carried out only by qualifi ed
and authorized technicians.
• Always switch off the speakers and disconnect them
from the mains before cleaning them.
The speaker case surface should be cleaned with a
dry cloth. Grime can be removed with a moist cloth that
has been dipped into water with a mild detergent and
then thoroughly wrung out.
Specifi cations:
Power supply:
230V; 50Hz
Power P.M.P.O:
800 Watt
Power RMS:
28 Watt
Frequency range:
20Hz - 20kHz
Dimensions:
Speaker dimensions:
(WxHxD) 9,2 x 7,5 x 18 cm
Subwoofer dimensions:
(WxHxD) 17,1 x 33,3 x 22 cm
User manual
L
2R086506_7bda.indd Abs2:4
2R086506_7bda.indd Abs2:4
17.12.2007 16:13:58 Uhr
17.12.2007 16:13:58 Uhr
