9
Contents
• Package contents
• Placement
• Connecting the loudspeaker system
• Operation and sound settings
• Settings with Windows XP
• Settings with Windows Vista
• FAQ
• Safety notes
• Specifi cations
Package Contents
1 x Subwoofer
3 x Front/centre satellites with 2 m cable length
2 x Rear satellites with 5 m cable length
1 x Remote control
3 x Audio cable
While you are unpacking, ensure that all components are
included and that there is no visible damage (crimped
cables, damaged insulation, etc.)
We recommend that you keep the packaging, including
the Styrofoam inserts, for transport at a later time.
Positioning
1. Place the front satellites to the right and left of the
monitor and the centre satellite above the monitor and
position them so that they face toward you.
2. Place the rear satellites to the side and slightly behind
your seating position.
3. You can place the subwoofer underneath your desk.
Because the human ear cannot localise low tones, the
exact position of the subwoofer is not crucial.
Connecting the Loudspeaker System
Connect the audio cable to the audio input on the rear of
the subwoofer and to the corresponding sockets on your
sound card.
Connect the loudspeaker connection cable to the audio
output on the subwoofer and connect the mains plug to
an available wall socket.
If the loudspeaker connection cable is not long enough
to allow for the placement that you want, you can use
extension cables with RCA sockets and RCA plugs so that
the cable is long enough.
Carefully read through the safety notes before using the
device for the fi rst time.
