2
G
Operating instruction
Controls and displays
1. Display
2. Time
3. Radio symbol
4. Alarm symbol 1
5. Alarm symbol 2
6. Date
7. Day of the week
8. Room temperature
9. Room humidity
10. Projection arm
11.
SNOOZE/LIGHT
button = activate the backlight (approx. 8
seconds) / stop the alarm for 5 minutes
12.
TIME
button = set the Time mode
13.
ALARM
button = set the Alarm mode
14.
UP
button = increase the current set value / switch between
12 and 24-hour format
15.
DOWN
button = reduce the current set value (186381) /
switch between 12 and 24-hour format
16.
WAVE
button = activate/deactivate manual radio signal
reception
17.
ON/OFF
switch for alarm 1
18.
ON/OFF
switch for alarm 2
19.
ROTATE
button = rotate the projection by 0°, 90°, 180°
or 360°
20. Power supply unit connection socket
21. Battery compartment
22. USB charging port
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a dangerous
voltage of sufficient magnitude to constitute a risk of electric
shock.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• “Plus Charge” projection alarm clock
• Power supply unit
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not operate the product outside the power limits given in
the specifications.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not use the product in moist environments and avoid
splashes.
• Do not place the product near interference fields, metal frames,
computers, TVs, etc. Electronic devices and window frames can
negatively affect the product’s functionality.
• Do not drop the product and do not expose it to any major
shocks.
• Do not modify the product in any way. Doing so voids the
warranty.
• Keep the packaging material out of the reach of children due to
the risk of suffocation.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Use the item only in moderate climatic conditions.
• The product is intended for indoor use only.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable,
never on the cable itself.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes
damaged.
• Do not use the product if the AC adapter, adapter cable or
power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave
any and all service work to qualified experts.
Warning – Batteries
• When inserting batteries, note the correct polarity (+ and -
markings) and insert the batteries accordingly. Failure to do
so could result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that match the
specified type.
• Before you insert the batteries, clean the battery contacts and
the polar contacts.
• Do not allow children to change batteries without supervision.
• Do not mix old and new batteries or batteries of a different
type or make.
