24
13.9 Backlight
The backlight can be confi gured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
•
Proceed as follows:
Press and hold
[ ]/[ ]
System settings
Backlight
•
For the operation modes ‘
Operation mode
’
and ‘
Slumber mode
’, select between various
brightness levels.
•
For
Standby mode
, you may also choose a
brightness level for the backlight when the radio
is in standby (
display lighting
). Alternatively, you
can set the backlight to turn off completely in standby
(
Display lighting
Off
).
•
Choose a time interval for
Timeout (sec)
. When the
radio is in standby, press any button to illuminate the
display at the brightness level set for that operating
mode for the selected interval of time.
•
Alternatively, you can disable this feature
(
Timeout (sec)
Off
).
13.10 AUX: Auto-Standby
In
Aux in (Auxiliary Input)
operating mode, the radio
switches to standby mode after 15 minutes, by default.
To disable (
NO
) or activate (
YES
) this feature, proceed as
follows:
Press and hold
[ ]/[ ]
System settings
AUX: Auto-Standby
14. Care and Maintenance
•
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
•
If you do not use the product for a long time, turn off the
device and disconnect it from the power supply. Store it
in a clean, dry place out of direct sunlight.
15. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
