6
7
Pairing
Prior to using the speakerphone for the fi rst time, you must pair it with a Bluetooth-enabled mobile handset. The following
steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.
(a) Place the speakerphone and mobile handset no more than 1 meter apart.
(b) Ensure the speakerphone is under OFF mode.
(c) Press and hold the MFB for 6 seconds until you hear a long beep. The blue and red LEDs will fl ash on alternatively. It’s now
ready for pairing.
(d) Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. Mean while,
the handset will search for accessible Bluetooth devices.
(e) Select “BT-33A1” from the list.
(f) Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the handset. When pairing is
completed, you may hear a long beep and the blue LED will fl ash on 3 times. Now the speakerphone is under standby mode
with blue LED fl ashes on every 3 seconds.
(g) Press “Return” to go back to your handset’s main menu. (For most of the mobile handset models, a headset icon will be
shown on the screen.) You should now be able to make and receive calls through the speakerphone. Please place the
mobile handset to the speakerphone no more than 10 meters. (Obstruction could cause shorter sensing distance.)
IMPORTANT: If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the speakerphone’s
LED will fl ash off and speakerphone will be under off mode. Please repeat step (c) to (g) to pair the speakerphone and mobile
handset again.
Connection/Link between Speakerphone and Mobile Handset:
After pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if the headset ICON
is not shown on phone screen, please follow the simple steps to activate the Bluetooth connection/link through your handset or
speakerphone until the headset ICON is on the screen.
(1) On Handset: Select “BT-33A1” from the paired list on your handset screen.
(2) On Speakerphone: Short press MFB and select “Accept” on handset screen to accept connection.
IMPORTANT: Whenever Bluetooth connection/link is removed, for example: power off on speakerphone/mobile handset or out
of 10 meter sensing distance, please activate connection/link as suggested.
Disconnection between Speakerphone and Mobile Handset:
You may connect your speakerphone with another Bluetooth handset. Please follow the simple steps to disconnect the
speakerphone with the pre-paired handset.
(a) Power off the speakerphone.
(b) Select “disconnecting” to remove previous connection from your handset list.
Using the Speakerphone
Once pairing is completed, you may access the following functions. Some of the below-mentioned function is only accessible
for handsets supported with Hands-Free Profi le.
(a) Answering a Call:
To answer a call, wait for the speakerphone to ring, then short press the MFB to accept the call or answer the call via your
mobile handset in the normal way.
(b) Ending a Call:
Short press the MFB, to end your call or end the call via your mobile handset in the normal way. Mean while you can hear a
short beep from the speaker.
(c) Reject a Call:
When you hear the ringing tone, press and hold the MFB for 3 seconds until you hear a short beep.
(d) Voice Dialing:
If your mobile handset is voice dialing enabled, under standby mode, press the MFB and when you hear a beep, say the voice
tag.
IMPORTANT: Please make sure to record voice tag into the mobile handset before using voice dialing function. This
function is only applicable to mobile handset with Bluetooth Hands-Free Profi le. Functionality varies depending on the
mobile handset models you have. Please refer to your mobile handset user guide for additional information.
(e) Last Number Re-Dialing:
Under standby mode, short press MFB twice for last number redial.
(f) Adjusting the Volume:
During conversation in progress, press the volume button repeatedly until you reach the desired volume level.
(g) Mute & Un-mute:
To mute the speakerphone, press the mute button. Mean while, the blue LED fl ash on.
To un-mute the speakerphone, press mute button again.
Restore to Default-Remove Previous Pairing & Connection
You may want to reset the speakerphone to its original settings and clear the previous pairing. Please follow these simple
steps.
(a) Ensure the speakerphone is under standby mode.
(b) Press and hold the volume increase & decrease buttons simultaneously for 10 sec. until blue & red LEDs fl ash on alternatively.
Release the buttons.
(c) Again, press and hold the volume increase & decrease buttons simultaneously for 2 sec. until speakerphone emits 2 short
beeps. The speakerphone will be powered off and back to original setting.
(d) After defaulting the speakerphone, if speakerphone is power on again, the red LED will fl ash on every 3 seconds and
speakerphone will emit 3 beeps every 1 minute. Then, the speakerphone will power off within 2 minutes. This is normal.
The speakerphone will be back to normal performance after completion of pairing with Bluetooth devices.
l
Die Konformitätserklärung nach der R&TTE-Richtlinie 99/5/EG fi nden Sie unter www.hama.de
L
See www.hama.de for declaration of conformity with R&TTE Directive 99/5/EC
