4
g
1) Volume Control
2) Speaker connecting cable (red/white)
3) Connecting cable for remote control
4) Bass control
5) Connecting socket for the cable to the PC or
soundcard
6) Connecting socket for remote control cable
7) Speaker connecting sockets (red/white)
8) On/off switch
9) Power cord
10) PC connecting cable
• Using connection cable (2), connect both satellites to
the speaker sockets (7) on the subwoofer
• Connect the connection cable for controlling the
controls (3) to the socket (6) on the subwoofer
• Connect the supplied connecting cable (10) to the
sockets (5) on the subwoofer and on the sound source
• Connect your sound system to the power supply.
Make sure to check the voltage before switching on
the system.
• Finished.
Safety instructions
Please observe the safety remarks in the operating
instructions for the PC!
• The speakers should only be transported in their
original packaging, or in other suitable packaging
which protects them from jolts and knocks.
• Condensation can arise when speakers are tranferred
from a cold environment into a warm room. Allow the
speakers to climatise to the ambient temperature, and
ensure that they are absolutely dry, before they are
used.
• Ensure that the local mains voltage is 230 V/50 Hz.
• Ensure that the mains socket is freely accessible.
• The speakers’ ON/OFF switch does NOT disconnect the
speakers from the mains! The mains plug has to be
withdrawn from the mains socket to disconect the
speakers.
• Do not use the speakers in moist rooms.
• Conduct the cables in such a manner that they can not
become a hazard (tripping) or be damged. Observe the
corresponding remarks in the instructions when
connecting the speakers.
• Ensure that no objects (e.g. metal paper clips, etc.)
or liquids can enter the interior of the speakers
(electric shock, short circuit).
• Immediately switch off the speakers and disconnect
them from the mains in emergencies (e.g. damage to
speaker case, controls or power supply line, or in the
event of foreign bodies or liquids entering the
speakers).
• Any repair work must be carried out only by qualifi ed
and authorized technicians.
• Always switch off the speakers and disconnect them
from the mains before cleaning them.
The speaker case surface should be cleaned with a dry
cloth. Grime can be removed with a moist cloth that has
been dipped into water with a mild detergent and then
thoroughly wrung out.
Support and Contact Information
If products are defective:
Please contact your dealer or Hama Product Consulting
if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product information can
be found at www.hama.com
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: [email protected]
User manual
