36
•
Set
Auto-check setting
to
YES
to have the radio
automatically check for new software updates at regular
intervals. (Recommendation)
•
Choose
Check now
to manually start a check for
software updates.
Warning
•
Make sure that the radio has a stable power supply
before you start a software update.
•
Power supply failure during a software update can
cause irreparable damage to the radio.
17.7 Setup wizard
You can restart the setup wizard
(
5.4.1. Setup wizard
)
at
any time by proceeding as follows:
[
menu
]
System settings
Setup wizard
17.8 Info
•
To have the radio display current information about
its hardware and software (version numbers, device
designation, radio ID, etc.), proceed as follows:
[
menu
]
System settings
Info
•
If you have already registered your radio on
the online portal of Frontier Silicon
(
http://www.wifiradio-frontier.com
), then
you can find out the radio ID there, as well.
17.9 Backlight
Brightness sensor activated
•
Move the sliding switch (27) to the ON position.
•
The brightness of the display is now automatically
adjusted according to the ambient brightness.
Brightness sensor deactivated
•
Move the sliding switch (27) to the OFF position.
The backlight can be configured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
•
Proceed as follows:
[
menu
]
System settings
Backlight
•
For the operation modes
Operation Mode
and
Slumber mode
, select between various brightness
levels
.
•
For
Standby Mode
, you may also choose a brightness
level for the backlight when the radio is in standby
(
Standby Level)
. Alternatively, you can set the backlight
to turn off completely in standby (
Standby Level
Off).
•
Choose a time interval for
Timeout
. When the radio is in
standby, press [
navigation
] to illuminate the display at
the brightness level set for that operating mode for the
selected interval of time.
•
Alternatively, you can disable this feature (
Timeout
Off).
Alternatively, press [ ] on the remote control to directly
adjust the backlight setting for the current operating mode.
