27
•
After the defined time the radio switches to standby
mode.
•
Press [
] - or [
volume -/+]
/ [
], to turn the
radio back on.
•
If a time interval is already activated, you can change
or disable it at any time by again pressing [
] or
[
SLEEP
] on the remote control.
Note - Backlight
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in normal operation.
15.9. Backlight
14. Alarms
The Radio has two individually adjustable alarm times.
14.1 Alarm settings
•
You can access the alarm settings as follows:
[
alarm
]
•
Or:
[
menu
]
Main menu
Alarms
•
Alarm 1 and alarm 2 are configured identically. So you
can save two different alarm times. Select alarm 1 or
2 and then make the following settings by means of
[
enter/navigate
]:
Enable:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected
Once
, enter the date and time for the
one-off alarm.
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(Buzz),
by
DAB
,
FM
or by the
Internet radio
.
Preset:
If you selected
Internet radio/ DAB/ FM
, choose which
station or podcast you wish to be woken with. You can
choose any of the 30 favourite station slots or the
Last
listened
.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Save:
Confirm this menu item to complete your alarm settings.
Note
•
When using
Internet radio
for the alarm sound take
care that the internet connection will be available at
the time of the alarm.
If no internet connection is available the radio instead
uses the wake-up buzzer (
Buzz
).
•
It is recommended to allow the radio to update the
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
14.2 Activating/ deactivating the alarm
•
Confirm the menu item
Save
in alarm settings to activate
the alarm.
•
Disable the alarm by setting the
Mode
: to
Off
