4
Shredder CC 514S, with wheels, automatic
The CC514S is a shredder with a slimline, space-saving
design, to fi t easily under your desk.
It is equipped with a large, integrated 8-litre basket
which catches the shredded paper.
If the basket is removed during operation, the device
automatically switches itself off for your safety, so that
getting your hand caught in the running slitting mecha-
nism is hardly possible.
Two wheels at the back of the case enable you to move
the CC 514S as you wish. Thus you can easily pull it out
from underneath the desk, from the corner of the room
etc.
SAFETY INSTRUCTIONS:
1. Read all instructions thoroughly before using the
machine.
2. Place the cable in such a way that no one will trip
over it.
3. Never open the housing of the shredder.
4. Do not operate the device if it is wet.
5. Switch off the device when not in use and remove
the plug from the socket.
6. Stop using the machine if there is damage to the
cable, housing or holder.
INSTALLATION:
1. Remove all packaging materials from the device.
2. Place the shredder on a stable, even surface.
3. Connect the power cable to a 220-240 V~ outlet.
4. Set the switch to
„AUTO”
. If the green light does not
go on after this, the paper basket may not have been
inserted properly. Pull the basket out and slide it into
the housing fully.
OPERATION MODES:
Using the switch on the device, select one of the
following modes.
AUTO
– On this setting, the shredder switches itself on
automatically as soon as you insert paper into the paper
feeder and switches itself off automatically when there
is no more paper.
REV
– In the unlikely case of paper being trapped in the
cutter, the reverse function allows you to remove the
blockage.
OFF
– This setting switches off the shredder.
SLITTING CAPACITY:
The CC 514S can shred up to fi ve sheets of 75 g/m² pa-
per with a maximum width of 220 mm at the same time.
A FOLDED SHEET OF PAPER IS THE EQUIVALENT OF
TWO SHEETS!
WARNING:
1. Make sure you do not insert things such as clothes,
ties, jewellery or hair into the paper feeder.
2. Set the switch to OFF if you will not use the shredder
for a prolonged period of time.
3. Remove any paper clips and staples from the paper
before shredding. The shredder will not break if you
forget to do this once in a while. However, you should
normally avoid this.
4. Keep hands and fi ngers away from the underside of
the shredder during operation and especially from
the cutting rollers, as this can cause serious injury.
5. Do not operate the shredder for more than three
minutes at a time. If you have a large quantity of
paper to shred, we recommend that you switch off
the shredder after three minutes of continuous
operation and wait approx. twenty minutes before
switching it back on.
6. The socket you use should be close to the shredder
and easily accessible.
7. Always switch the shredder off (or remove the
mains plug) before moving or cleaning the shredder
or emptying the paper basket.
8. Empty the paper basket regularly.
g
Operating Instruction
All manuals and user guides at all-guides.com
