2). Users will hear a ring tone from the headset. Press
"Answer" button to continue the connection.
3). The icon of the headset will be changed to
connecting status.
2. Chatting
1). Launch VoIP software after the headset had been
connected.
2). If you cannot hear voice from headset, try to check
the configuration of audio device setting.
Make sure "Bluetooth Audio" is selected.
Phone Call Operation:
Make sure the headset had been paired with your
mobile phone.
1. Make a Call:
1). Dial out the number from your mobile phone.
2). Voice is automatically transferred to headset.
2. Receive a Call:
1). When there is an incoming call, press the answer
button to answer the call.
The music will stop when a call is answered.
2). Press the Volume control button to adjust the
volume.
3). When finish talking, press the answer button to end
the call and the music will resume playing.
3. Reject a Call:
- Press the reject button on the mobile phone to
reject a call.
Use with music player and mobile phone at the same
time.
1. The stereo headset needs to be paired and
connected with both devices.
2. When listening to music, if there is an incoming
call, users will hear a notice tone from the stereo
headset.
3. Users can press the answer button on the stereo
headset to answer the call or press the reject
button on the mobile phone to reject the call.
4. The stereo headset can be used with mobile phone
and stereo audio service at the same time,
but not with headset service.
5. There could be some compatibility issues on
certain brands/models of mobile phones.
For detail information, please visit our website at
http://www.hama.de
Important Information
Product care
- Use of non-original accessories may result in
performance deterioration, injury, products'
damage, electronic shock, and warranty
termination.
- Attempt to disassemble your stereo headset or
USB adapter may damage it, and the warranty will
be void.
- Always store the BSH-150 with the power
turned off.
- Avoid exposing to direct sunlight or other heat
source.
- Do not expose the BSH-150 to water or other
liquids.
Children
Please keep away the stereo headset and USB adapter
from children, as the small parts may cause
choking hazard.
4. Pair Headset with your cellular phone
Press and hold the pairing/track wheel button of the
headset for 6 seconds until the blue and red
LEDs are flashing alternatively. To properly perform pai-
ring procedure on your cellular phone,
please refer to the manual of your mobile phone for its
own pairing instruction. This device name is
set to be "Bluetooth Stereo Headset". If you are asked
to enter pin-code during pairing, please
enter 1234. (Note: The "1234" is default pin-code pre-
stored in this Headset.)
Status indicator
Status
Blue led
Red led
Power on
Blink
-
Pairing
Blink
Blink
Connected
Quick blink
Off
Charging
-
Static
Fully charged
-
Off
Stereo Audio (Audio Sink) & Headset Services
Bluetooth Stereo Headset provides two different servi-
ces - "stereo audio" (audio sink service) and
"headset service".
The stereo audio service allows users to listen to music
and provides users with a great stereo sound.
The headset service enables the microphone and allo-
ws user to chat over the Internet or do the voice
recording. However, these two services cannot be
used at the same time. One service needs to be
disconnected before the other one can be connected.
Music Operation
1. Connect the headset
Please connect the "stereo audio service" before
launching Windows media player or other media
players.
1). Open Bluetooth Settings. Move the cursor on the
"BSH-150" icon and right click it. Select
"Connect" to connect the headset.
2). The icon of the headset will be changed to
connecting status.
2. Play music
1). Launch music players, for example - Windows
Media Player, on your PC or PDA. Play music as
usually you do.
2). Users can also control music playback from the
headset. Be noticed that functions below are
available on Windows Media Player only.
a. Volume Control Button: press to adjust the volume.
(fig.1)
b. Play Button: Press to play/stop music. (fig.2)
c. Track control / paring wheel: Wheel back and
forward to change or skip tracks.
Press the wheel to stop music. (fig.3)
Chat on VoIP
1. Connect the headset
Please connect "headset service" before launching
VoIP software such as Skype, MSN Messenger,
Yahoo Messenger etc.
1). Open Bluetooth Settings. Move the cursor on the
"BSH-150 (1)" icon and right click it. Select
"Connect" to connect the headset. If the service of
"BSH-150" is connecting, please disconnect it.
00057186bda 24.03.2006 8:03 Uhr Seite 18
