Hama BASIC L42A, Руководство по эксплуатации

Страница: 9 / 78

6 Basic L42A
G
4.3 Lamination
■ Place the document to be laminated in the appropriate pouch (see
figure).
■ Insert the film pouch into the front opening of the device (4). Make
sure that the sealed end is inserted first.
nOtE
► Film pouches of all sizes should be inserted at the centre of
the front opening so that they pass through the sensor.
‹ The document is returned at the rear (5).
‹ If an item has not been fully laminated, repeat the first steps.
CaUtIOn!
► Laminated items coming out of the device may be too hot to
touch.
nOtE
► The laminated sheet is hot and can be bent easily. Place the
item on a flat surface and leave to cool so that it does not
curl at the edges.
4.4 Switching off the device
‹ Press the on/off switch
3
to switch off the device. The ready
lamp
2
goes out.