7
3.2.1.1 Operation as an Access Point (AP)
Selecting this under
Band
allows you to specify
whether the device runs on the 2.4 Ghz band in
accordance with the 802.11b (11Mbps), 802.11g
(54Mbps) standards or works in combination with
802.11b and 802.11g. Then set the
ESSID
. The
ESSID
can contain up to 32 characters and must
be identical for all devices in the network.
Chan-
nel Number
allows you to select the channel in
which the data is to be transfered. 13 channels
are available.
Example
of an ESSID : “WLAN_Router_54Mbps”
Click
Apply
to save your settings!
To set the encryption for your wireless network,
click
Continue
in the next window and then
Security Settings
in the menu on the left.
Continue reading on page 09 for instructions
on setting Wireless LAN encryption.
Click
Apply
in the next window if you want to operate a wireless network without encryption. The router is then restarted. The
wireless network is available after you restart.
3.2.1.2 Operation as an AP Bridge Point to Point
Selecting this under
Band
allows you to specify
whether the device runs ion the 2.4 Ghz band in
accordance with the 802.11b (11Mbps), 802.11g
(54Mbps) standards or works in combination with
802.11b and 802.11g.
Channel Number
allows you
to select the channel in which the data is to be
transferred. 13 channels are available. Enter the
address of the access point to which the bridge
connection is to be made in
MAC address 1
. To set
the encryption for your wireless network, click the
Set Security
button.
Continue reading on page 11 for instructions on
setting Wireless LAN encryption.
Click
Apply
in the next window, and again in the
window after that if you want to operate a wireless
network without encryption. The router is then
restarted. The wireless network is available after
you restart.
