Hama 40089, Руководство по эксплуатации

Страница: 9 / 15

B. Device lock
With the device lock function, you can pro-
tect the current code from being overwritten
when programming or searching for codes.
The lock can also be deactivated.
a. Press the button for the device that you
wish to protect from overwriting, e.g. [TV],
[CBL/SAT], [AUX] etc.
b. Press and hold the SET button for at least 3
seconds, then release it.
c. Using the C or D buttons, select “CONFIG-
URE” and then press the OK button.
d. Using the C or D buttons, select “DEV
LOCK” and then press the OK button.
e. “TV OFF” appears on the display. Using the
A or B buttons, select ON.
f. Press the OK button to save the settings.
“SUCCESS” appears in the display. The
remote control then returns to the current
settings status.
g. To finish the setting, press any device but-
ton. To return to the previous status, press
EXIT. To select any other setting, use the
C or D buttons.
C. Changing device assignment
If you wish to operate a second video
recorder (or a second TV, SAT/CBL device,
CD or DVD player, cassette recorder, radio
etc.), then you can move its device code to
AUX in order to carry out a device change
(CODE SHIFT). To do this, carry out the fol-
lowing steps:
1. Press and hold the SET button on the new
remote control for a little over 3 seconds,
then release it. Select “CODE SETUP” us-
ing the arrow buttons and confirm with OK.
2. “DEV SEARCH” is shown on the display
in the LCD menu. You can then access
the CODE SHIFT display using the arrow
buttons and confirm this again with OK.
Now select the device by pressing the
corresponding button (e.g. VCR) and enter
the correct code number.
3. Press the OK button to save the settings
and exit the function. “SUCCESS” appears
in the display.
4. You can now operate the second video
recorder (or another device) using the
AUX device button.
D. Setting up the LCD clock
1. Press and hold the SET button for at least 3
seconds, then release it.
2. Using the C or D buttons, select “CONFIG-
URE” and then press the OK button.
3. “TIME SETUP” appears on the display.
Confirm with OK.
4. Enter the time and select AM or PM using
the D button. Confirm with OK.
5. “SUCCESS” now appears on the display.
6. To finish the setting, press any device
button. To return to the previous status,
press EXIT. To select any other setting, use
the C or D buttons. The time is displayed
after setup.
E. MACRO function
The remote control is equipped with a
MACRO function, with which you can carry
out several processes in succession. This is
especially useful for home theatre systems.
Press the MACRO button and hold it down
while you press the number button 1 (or but-
tons 2 or 3). Release both buttons. The LED
flashes. A previously programmed command
is sent from the remote control simultane-
ously.
To set up the MACRO function,
carry out the following steps:
1. Press and hold the SET button for at least 3
seconds, then release it.
2. Using the C or D buttons, select “MACRO”
and then press the OK button.
3. Using the C or D buttons, select
“MACRO1” (or “MACRO2” or “MACRO3”)
and then press the OK button.
4. “SETTING” appears on the display. Press
the OK button.
17 16
Deleting all learned commands for a device
To delete all learned commands for a device
at once (instead of individually), proceed as
follows:
1. Press the button for the device where you
wish to delete all commands (e.g. TV).
2. Press and hold the SET button for a little
over 3 seconds, then release it.
3. Using the C or D buttons, scroll until
“LEARNING” is displayed, then confirm
with OK. “LEARN KEY” now appears on
the display.
4. Using the C or D buttons, scroll until “DE-
LETE DEV” is displayed, then press OK.
5. Select the device to be deleted, then press OK.
6. “SURE DELETE” appears on the display.
After confirming with OK, “SUCCESS”
appears in the display.
7. Repeat step 5 to delete commands on other
device buttons.
8. You can cancel the deletion process by
pressing the EXIT button.
Note:
In some cases it may take around 3 minutes
before all device commands are deleted. If
only a few commands have been stored, then
we recommend deleting them individually
one after the other.
Deleting all button programming
To delete all button programming, carry out
the following steps:
1. Press and hold the SET button for a little
over 3 seconds, then release it.
2. Using the C or D buttons, scroll until
“LEARNING” is displayed, then confirm
with OK. “LEARN KEY” now appears on
the display.
3. Using the C or D buttons, scroll until
“DELETE ALL” is displayed, then confirm
with OK.“LEARN KEY” now appears on
the display.
4. “SURE DELETE” appears in the display,
which must also be confirmed by pressing
OK. The deletion process is completed
when “SUCCESS” is shown on the display.
Additional functions
A. Locking/unlocking volume and mute
This function is useful if you control the
volume using only one device. If the volume
is centrally controlled via an amplifier, for
example, you can use this function to lock
the volume and mute buttons of the AUX
device (amplifier in AUX) or any other device
currently being used (e.g. TV, DVD, VCR etc.)
so that
the remote control‘s volume or mute buttons
control the corresponding amplifier func-
tions.
a. Press the button for the device whose vol-
ume and mute button you wish to operate,
e.g. [TV], [CBL/SAT], [AUX] etc.
b. Press and hold the SET button for at least 3
seconds, then release it.
c. Using the C or D buttons, select „CONFIG-
URE“ and then press the OK button.
d. Using the C or D buttons, select “VOL
LOCK” and then press the OK button.
e. “TV OFF” appears on the display. Using the
or buttons, select ON.
f. Press the OK button to save the settings.
“SUCCESS” appears in the display. The
remote control then returns to the current
settings status.
g. To finish the setting, press any device but-
ton. To return to the previous status, press
EXIT. To select any other setting, use the
C or D buttons.