Hama 40089, Руководство по эксплуатации

Страница: 10 / 15

d Bedienungsanleitung
19 18
5. You can combine several buttons to carry
out several processes in the order you
wish. (Example: TV + POWER + MUTE +
AV, DVD + PLAY, VCR + RECORD, etc. – In
this example, you would turn on the TV set,
switch on mute, change to AV mode, start
a DVD and simultaneously start recording
with the video recorder.) This example
shows how powerful the MACRO function
can be, if used effectively.
6. Press the OK button to save the settings.
“SUCCESS” appears in the display. The
remote control then returns to the current
settings status.
7. To finish the setting, press any device but-
ton. To return to the previous status, press
EXIT. To select any other setting, use the
C or D buttons.
Note:
1. You can program up to 10 different com-
mands with only one MACRO command.
2. Please ensure that all buttons can
otherwise send signals, even if you have
programmed them with the MACRO func-
tion. Before setting up a MACRO, you can
test the button by pressing it and checking
if the correct device flashes.
3. When carrying out a MACRO function,
please ensure that the device is being
used correctly. For example, if you wish
to play a DVD and record using a video
recorder, a DVD must be inserted.
4. Please ensure that the remote control can
be “seen” by all devices and is pointing in
the right direction (at the device you wish
to operate).
Deleting MACRO functions
1. Press and hold the SET button for at least 3
seconds, then release it.
2. Using the C or D buttons, select “MACRO”
and then press the OK button.
3. Using the C or D buttons, select the
correct MACRO setting (for example,
“MACRO2”) and then press the OK button.
“SETTING” appears on the display.
4. Using the C or D buttons, select “DELETE”
and then press the OK button.
5. “SURE DELETE” appears on the display.
Confirm the deletion procedure with OK.
“SUCCESS” appears in the display. The
remote control then returns to the current
settings status.
6. To finish the setting, press any device but-
ton. To return to the previous status, press
EXIT. To select any other setting, use the
C or D buttons.
F. SCAN function
The Hama 8in1 Universal LCD Remote Control
is equipped with a SCAN function for a quick
overview of all TV or CAB/SAT channels.
1. Press the button for the device you wish to
operate (e.g. TV).
2. Press and hold the SCAN button for at
least 1 second. The SCAN mode is started
when the device LED flashes. The Hama
8in1 Universal LCD Remote Control then
automatically searches all channels for
the quick overview.
Note:
1. The Hama 8in1 Universal LCD Remote
Control must be pointed at the device until
the SCAN mode is finished.
2. To exit the SCAN mode, press any button
on the remote control.
G. LED backlight
When the LED backlight function is activated,
then the display is illuminated as soon as a
button is pressed. Press and hold the SET
button for more than 3 seconds, then release
it.
1. Using the C or D buttons, select the
“CONFIGURE” menu item and then press
the OK button.
2. Using the C or D buttons, select the
“LIGHT” menu item and press the OK
button again.
3. You can switch the function “ON” and
“OFF” using the A or B buttons.
4. Press the OK button to save the settings.
“SUCCESS” appears in the display, fol-
lowed by the current menu item. To finish
the setting, press any device button. To
return to the previous menu item, press
EXIT. To select another menu item, use the
C or D buttons.
H. Contrast settings
You can set the display contrast of your
remote control by carrying out the following
steps:
1. Press and hold the SET button for a little
over 3 seconds, then release it.
2. Using the C or D buttons, scroll until
“CONFIGURE” is displayed and confirm
with OK.
3. By pressing the C or D buttons again,
scroll until “CONTRAST” is displayed and
confirm again with OK.
4. Set the desired contrast using the A or B
buttons and confirm with OK.
5. Press the OK button to save the settings.
“SUCCESS” appears in the display, fol-
lowed by the current menu item. To finish
the setting, press any device button. To
return to the previous menu item, press
EXIT. To select another menu item, use the
C or D buttons.
Reset
This function deletes all configuration data
and resets the remote control to the original
standard settings.
1. Press and hold the SET button for a little
over 3 seconds, then release it.
2. Using the C or D buttons, scroll until
“CONFIGURE” is displayed and confirm
with OK.
3. By pressing the C or D buttons again,
scroll until “CLEAR ALL” is displayed and
confirm again with OK. “SURE CLEAR”
appears in the display.
4. Press the OK button to delete all stored
settings. The remote control is then reset
to the original standard settings.
Other
Once all settings have been made, press the
device button on the remote control for the
device you wish to operate (TV, VCR etc.). You
can now use the remote control.