12
7.4 Dismantling the smoke detector
• Turn the smoke detector counterclockwise to
remove it from the base plate.
• Remove the battery by disconnecting it from the
battery connection
• Store the smoke detector in a safe and dust-free
place if it is to be dismantled for a short time,
e.g. during renovation work, or replace it with
a new device
• Now carry out the assembly and function check
- as described in
5.2. Installing the smoke
detector
.
8. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
9. Declaration of performance
The declaration of performance for this product can
be found at:
www.hama.com ->00223841 -> Downloads
10.Manufacturer and approval holder
Siterwell Electronics CO., Limited
No. 666 Qingfeng Road, Jiangbei District, Ningbo,
Zhejiang Province, China
Distributed by
Hama GmbH & Co KG
86652 Monheim / Germany
www.hama.com
EN14605:2005 + AC:2008
17
1772
DoP: GS536G-DoP-002
11.Technical data
Battery type
3V (CR123A) lithium
battery
(permanently
installed)
Current
consumption
<10µA (Standby)
< 30mA (Alarm)
Alarm volume
85dB(A) within 3
metres
Detection method
Optical
Sound pattern of
the alarm
3 x signal tone,
brief pause,
3 x signal tone,
brief pause,
3 x signal tone,
the LED flashes
quickly (> 1x per
second). Repeat of
the alarm pattern
Temperature range
5°C - 40°C
12. LED and acoustic signalling
LED flashes every
40 seconds
The smoke detector is
working properly
LED flashes quickly
(>1 x per second)
and the alarm
sounds
The TEST button was
pressed or the alarm
has been triggered
by smoke
LED flashes every
40 seconds and a
short alarm tone
sounds
The battery is
weak and must be
replaced
