6.2 Mounting on the wall
6.2.1 Preparing the intended mounting surface
Get support and help from other people for the following assembly steps.
70 mm
Ø 10mm
•
First use the bracket as a template and re-measure if necessary to ensure that the position is correct. Use a
spirit level to check the horizontal and vertical alignment of the bracket on the wall. Now mark the holes on
the wall.
•
To attach the wall bracket to the wall, you need a drill and a drilling attachment with a diameter of 10mm.
Make sure that the drilling attachment is suitable for the intended wall. The depth of the hole should be
70mm .
•
To ensure a secure hold, vacuum out the drill holes with a vacuum nozzle so that the drill hole is free of drill
dust. Now insert the plug [A2] into the drill hole so that it is flush with the hole.
