d
Bedienungsanleitung
8
Installation on Windows 2000 with Service
Pack 4
Preparation:
Ensure that your user account has administrator
rights for Windows 2000, otherwise the driver
installation will not be successful.
Because Windows 2000 with Service Pack 4
already includes the necessary drivers, you do
not need to install any drivers separately. After
you have inserted the USB printer converter into
your computer and restarted Windows 2000, the
computer recognizes and installs the converter
after a short time.
You can check whether the converter has been
installed successfully by selecting
Start ->
Settings -> Control Panel -> System -> Hardware
-> Device Manager
. The following entry should
appear without a yellow exclamation mark.
Universal Serial Bus controllers
• USB Printing Support
The new port must be assigned before you can
use the printer on the USB port. Click
Start ->
Settings -> Control Panel -> Printers
. Select
your printer, hold down the right mouse button,
and click
„Properties“
in the dialog box. Select
„USB001 virtual printer port for USB“
in
Ports
.
Testing the printer:
You can check whether the
connection was properly installed in
General ->
Print test page
.
Note:
We highly recommend that Window 2000
users at least install Service Pack 4 due to
improved functionality and enhancements.
Installation on Windows ME:
The
Hardware Wizard
should open after the
converter is connected. In the
„What do you
want Windows to do?“
screen, select
„Specify
the location of the driver (advanced)“
and then
click
-> Next
. In the next window, select
„Search
for the best driver for your device“
and select
only
„Specify a location“
. Insert the enclosed
CD ROM into the drive and enter the path
„D:\US-
Blpt\me“
(you may have to enter a different drive
letter for your CD ROM drive)
-> Next -> Finish
.
You can check whether the converter has been
installed successfully by selecting
Start ->
Settings -> Control Panel -> System -> Device
Manager
. The following entry should appear
without a yellow exclamation mark:
Universal serial bus controller
(MS):USB-Bridge
The new port must be assigned before you can
use the printer on the USB port. Click
Start ->
Settings -> Control Panel -> Printers
. Select
your printer, hold down the right mouse button,
and click
„Properties“
in the dialog box. Select
„USB001 (Virtual printer port for USB)“
in
Details
under the option
„Print to the following port“
.
Testing the printer:
You can check whether the
connection was properly installed in
General ->
Print test page
.
