Hama 00210538, Руководство по эксплуатации

Страница: 4 / 40

2
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package contents
• Smartphone / tablet holder
• These operating instructions
Note
Please check the package contents for completeness
before installing the holder and ensure that there are
no faulty or damaged parts.
3. Safety instructions
• The product is intended for private, non-commercial
use only.
• Use the product only for the intended purpose.
• Do not use the product in a damp environment and
avoid splashing water.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Do not attach any additional objects to the product.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
• Observe the other warnings and safety instructions.
Warning
• Ensure that the product does not exceed its maximum
permitted carrying capacity and that no load
exceeding the maximum permitted dimensions is
attached.
• Make sure that the product is loaded symmetrically.
• During adjustment, ensure that the product is loaded
symmetrically and that the maximum permitted
carrying capacity is not exceeded.
• The product is used to set up smartphones, tablet
PCs and similar or to attach them to tabletops and
shelving.
4. Installation
Warning - Mounting
• Only set the product up on even, non-slip surfaces
with a sufficient load-bearing capacity for the product
and the device attached to it.
• Do not mount the product above locations where
persons might sit or stand.
• Never apply force during mounting. This can damage
your device or the holder.
• During mounting, ensure that neither there are no
coils, hobs or other sources of moisture and heat in
the area of the holder's mounting or swivel range.
• Once you have mounted the product and the attached
load, check that they are sufficiently secure, resilient
and safe to use.
• You should repeat this check at regular intervals (at
least every three months).
• In the event of damage to the product, remove the
attached load and stop using the product.