2
3
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these
instructions in a safe place for future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•
„Elegance Pro“
radio-controlled alarm clock
• 1 AA battery
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect the product’s functionality.
• Do not drop the product and do not expose it to any major shocks.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified
experts.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately according to locally applicable regulations.
Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries
accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated
metal objects.
4. Getting Started
Open the
battery compartment cover
, remove the contact breaker and then close the
battery
compartment cover
again.
5. Operation
5.1. Automatic time setting using the DCF signal
• Once you have removed the contact breaker, an acoustic signal sounds and the alarm clock
automatically starts searching for a DCF signal.
• After approx. 5-10 minutes (depending on how quickly the radio signal was received), the hands
will set themselves to the correct time.
5.2. Setting the time manually
• If the correct time has not been set after approx. 10 minutes, this means the clock could not find
a DCF signal.
• Press and hold the
M.SET
button to manually set the correct time. Release the
M.SET
button once
you have reached the required time.
• The clock automatically continues to search for the DCF signal on a daily basis. If the signal is
received successfully, the manually set time is overwritten.
• You may need to change the installation location and avoid areas with possible sources of
interference (cordless and mobile telephones, wireless speakers, etc.).
5.3. Starting manual reception
• Once the clock is running, press the
REC
button for 3 seconds. This will set the hands to the 12:00
position. Now the clock starts searching for the DCF signal.
• If no signal has been received, the clock will show the time previously saved.
