Software configuration
TCP/IP protocol must be installed on all PCs which are to use the internet. By default, the IP address
192.168.1.1 and an activated DHCP server are configured for the router. That means that the connected PCs
are automatically given appropriate addresses and other settings. We recommend using these. Select
TCP/IP setting “Get IP address automatically” for all PCs connected to the router. You can then configure
the router using the web browser. The browser must be Java-capable and the Java function must be
activated (e.g. Internet Explorer 5.0 or better, or Netscape Navigator from version 4.71).
To start the configuration process, open your browser and enter “http://192.168.1.1” as the address.
The router selection menu is displayed (see below).
By default, the user name is set to admin and the password is admin. After entering these, click OK to log
on to the router. Start router configuration. (See screenshot below).
Click to continue.
You can change the default password in the next menu. We strongly recommend that you change the
password to prevent unauthorised users accessing the router configuration.
Click to continue.
Select a time zone. For Germany and surrounding countries, this is (GMT +01:00) Amsterdam, Berlin, Bern,
Rome, Stockholm, Vienna.
Click to continue.
The settings for the DHCP server are now made. We recommend that you do not change these values unless
you know what you are doing! Ensure that “Enable” is selected in the DHCP Server menu item.
Click to continue.
You must select the ADSL protocol in the next menu. In Germany this is generally PPPoE. The subsequent
instructions assume that the more common PPPoE protocol is used. Please contact your internet provider for
other protocols and settings.
User Name:
Provider user name
Password:
Provider password
Verify Password:
Provider password (repeat password for verification)
Important note for T-Online users:
The user name consists of: the 12-digit connection ID, T-Online number (if this is shorter than 12 digits, you
must complete it with the # symbol), 4-digit user number (e.g. 0001) and then @t-online.de.
Enter all components consecutively without spaces. The password is your T-Online access password.
Click to continue.
The next menu allows you to configure your wireless LAN. (See screenshot below).
If you want to use the integrated wireless LAN module, ensure that the “Enable” option is selected for
the Wireless LAN option.
Set the WLAN name under ESSID. This is for orientation purposes only, if more than one WLAN network
is used in your area.
Channel:
Set the channel you want to use for your WLAN network.
Click to continue.
In the next window, you must confirm the settings you made earlier.
Click to continue.
