Important note!
The enclosed PC-Linq software must be installed before you connect the USB direct connection cable to the USB port of your computer.
Additionally, it must be observed that the software and driver installation must be performed on both computers.
Installing the Software:
Once the computer has completely booted, insert the enclosed
driver CD-ROM
in your drive. Open
My Computer
and
select the
respective drive where you inserted the CD-ROM
. Select the PC subdirectory and then double-click on the
Setup
file. Now the program will be installed; please follow the instructions of the computer program. The following
icon should then appear on your desktop.
Driver installation under Windows
®
98 Second Edition:
After you have completely installed the software on your computer and then rebooted, insert the
USB direct connection cable
into the
USB port
of the computer. The
“Hardware Wizard”
opens and the cable is identified as a
"USB Device”
; then click on
-> Next
. Select
“Search for the best driver for your device (recommended)”
and click
-> Next
. Select
"Specify a location"
and enter
"D:\”
, whereby D:
indicates the initial of your CD drive and must be changed if necessary. Please ensure the proper spelling (no blanks ) then click on ->
Next
and finally
-> Finish
.
You can check whether driver has been installed successfully by selecting
Start -> Settings -> Control Panel -> System -> Hardware ->
Device Manager (classic)
or
Start -> Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager
.
The following entry must appear in your system without a yellow exclamation point.
Universal serial bus controller
USB bridge cable
Driver installation for Windows
®
Millenium Edition ME):
After you have completely installed the software on your computer and then rebooted, insert the
USB direct connection cable
into the
USB port
of the computer. The
“Hardware Wizard”
appears and the cable is identified as a
"USB Device”
; then click on
-> Next
. Select
the
“Specify the location of the driver (advanced)"
and then click on
-> Next
. The following options must be selected in the next window:
“Search for the best driver for your device (recommended)”
and
“Removable media (diskette, CD-Rom…)”
, click on
-> Next
to continue.
The device will be identified as a USB Bridge cable, and with a click on
-> Next
then the drivers will be installed on the PC. Finally, click
on
-> Finish
to complete driver installation.
To check whether drive has been installed successfully, call up the
Device Manager
by selecting
Start -> Settings -> Control Panel ->
System
and then clicking on the
Hardware -> Device Manager
tab.
The following entry must appear in your system without a yellow exclamation point.
Universal serial bus controller
USB Bridge cable
Driver installation on Windows
®
2000 Professional:
After you have completely installed the software on your computer and then rebooted, insert the
USB direct connection cable
into the
USB port
of the computer. Once the
New Hardware Wizard
appears click on
-> Next
. Select
“Search for the best driver for your device
(recommended)”
and click on -
> Next
. Just select
"CD-ROM drives"
and click on
-> Next
. Windows
®
then copies the required driver files
-> Finish
.
To check whether drive has been installed successfully, call up the
Device Manager
by selecting
Start -> Settings -> Control Panel ->
System
and then clicking on the Hardware tab and selecting the menu option
Device Manager
.
The following entry must appear in your system without a yellow exclamation point.
USB Controller
USB Bridge cable
Installing Drivers for Windows
®
XP:
After you have completely installed the software on your computer and then rebooted, insert the
USB direct connection cable
into the
USB port
of the computer. Now the
"New Hardware Wizard"
appears; for the question
"Should a new connection with Windows
®
Update
be made to look for software?"
click on
-> No, not now -> Next
. Select the option
“Install software from a list or particular source (for
advanced users)”
. Click on
-> Next
. Just select
“Search removable media (diskette, CD… )”
and click on
Next -> Next
.
The drivers for the cable are now copied. Should you receive the message Unsuccessful Windows
®
logo test during installation, click on
the
“Continue installation”
to continue the installation process and then on
-> “Finish”
.
To check whether drive has been installed successfully, call up the
Device Manager
by selecting
Start -> System -> System
and
Maintenance -> System
and then click on the
Hardware
tab and select the menu option
Device Manager
.
L
Manual for USB direct connection cables
5
00042005bda 02.06.2006 12:23 Uhr Seite 7
