6
7. Maintenance
•
Do not mix new and used batteries for powering the
Universal Remote Control, as old batteries tend to leak and
may cause power drain.
•
Do not use corrosive or abrasive cleaners on your Universal
Remote Control.
•
Keep the Universal Remote Control dust free by wiping it
with a soft, dry cloth.
8. Troubleshooting
Q.
My Universal Remote Control does not work at all!
A.
Check your A/V device. If the device’s main switch is
turned off, your URC cannot operate your device.
A.
Check whether your batteries are inserted properly and
are in the c/- position.
A.
Check whether you have pressed the corresponding
device mode key for your device.
A.
If the batteries are low, replace the batteries.
Q.
If several Device Codes are listed under the brand of
my A/V device, how can I select the correct Device
Code?
A.
To determine the correct Device Code for your A/V
device, test the codes one by one until most keys work
properly.
Q.
My A/V equipment responds only to some of the
commands.
A.
Try other codes until most keys work properly.
9. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of
with household waste. Consumers are obliged by law to
return electrical and electronic devices as well as batteries at
the end of their service lives to the public collecting points set
up for this purpose or point of sale. Details to this are defined
by the national law of the respective country. This symbol on
the product, the instruction manual or the package indicates
that a product is subject to these regulations. By recycling,
reusing the materials or other forms of utilising old devices/
batteries, you are making an important contribution to
protecting our environment.
