17
Capture Jet
®
Water Wash
Operation & Maintenance & Service Manual
CJ
O
WWM/0
120
09/re
v1/EN
To assemble the KFR filter remover:
Screw together stainless steel pipe, coupling, and bracket and tighten all joints. (
as shown in above picture
)
KSA Filter Removal
with Model KFR
To remove filter:
Insert bracket into the inside KSA filter slots, and lift
upward until filter slides out of plenum.
To install filter:
Place filter on KFR (filter removal tool) bracket, raise filter
into place inside exhaust plenum. Slide upward until
top lip of filter is locked into place and bottom lip of filter
slides in place inside the exhaust plenum.
*** It is very Important to lock top lip of filter in place
in installation as shown in reference drawing.
To remove
filter
To install
filter
Filter Installation and Removal
16 ga. S.S. Bracket
S.S. Coupling
S.S. Pipe