8
Capture Jet
®
Operation & Maintenance Manual
OM-0
05/0520
17/re
v3/EN
Splice Strip / U-Channel Assemblies
U-Channel
A
A
B
Splice Strip:
For hoods placed end to end: Slide over bottom front edge first then over top,
secure by welding together, or as an option using screws for models with
supply plenum.
Fig. 1
Fig. 2
U-Channel:
For hood models that are placed back to back
(as shown in Fig. 1):
Slide the U-Channel A up over the back of the hood systems, and secure
with sheet metal screws.
For hood models that are placed end to end
(as shown in Fig. 2)
:
Pry apart the U-Channel at one end and slide over the end panels,
fastening in place where the end to end hood’s side panels meet.
Installation Notes:
B
Splice Strip
Hoods shown end to end
Hoods shown back to back
A
A
U-Channel
