Haltech NEXUS R5, Быстрый старт

Страница: 3 / 13

4 5
1 Power LED
2 DTC LED
3 Wi-Fi LED
4 Datalog LED
5 8A HCO LEDs
6 25A HCO LEDs
7 Battery Negative Stud
8 Battery Positive Stud
9 Wi-Fi Antenna (RP-SMA)
10 USB-C Port (Comms)
11 Connector A (Superseal 34-pin Keyway 1)
12 Connector B (Superseal 26-pin Keyway 1)
13 Connector C (Superseal 34-pin Keyway 2)
14 Connector D (Superseal 26-pin Keyway 3)
15 Connector E (DTP-4)
16 Mounting Holes
10 11 12 13 14 15
1 2 3 4 5
6
7 8
9
16
16
NEXUS R5 OVERVIEW NEXUS R5 LED BEHAVIOUR
LED COLOUR CONDITION
Power Green Normal operation (on main power or low power mode)
Blue Connect to unit and install firmware
Red Hardware fault
DTC None DTCs not present
Yellow A DTC is present (of any kind, past/present/not severe/severe)
Blue PDM in boot mode - connect to unit and install firmware
WiFi None Wi-Fi is disabled
Green solid Wi-Fi is enabled
Green flashing Wi-Fi is enabled and connected to NSP
Datalog None Unit is not logging
Yellow flashing Unit is logging, unit is not looping or not full
Yellow Logging, unit is looping or full
HCO (all) None Channel is off
Green Channel is on - duty cycle is >0% and operating correctly
Red Channel is not allowed to be driven. Usually caused by (but not limited to)
an overcurrent this drive cycle