Assembly instruction
– PSD/PSC 4xx positioning system
© 15/03/2022, halstrup-walcher
- 3 -
7100.006844 Assembly instruction PSD/PSC 4xx B EN
Storage and transportation of devices
The PSD/PSC 4xx positioning system should always be stored and
transported to the place of installation in its original packaging.
Maintenance, cleaning and repair of
devices
The drive requires no maintenance. The drive may only be cleaned
from the outside with a damp cloth.
Repairs should only be carried out by the manufacturer.
Installing the device
Depending on the model, the drive can be installed on the machine
using a hollow or solid circular shaft.
ATTENTION:
Never apply force to the housing of the drive,
e. g. for supporting weight.
Installing a drive with hollow shaft
How to mount the drive on a shaft.
Tools required: 3 mm allen key.
Example:
Instructions:
1. Slide the drive onto the shaft to be driven.
2. Guide the torque support into the hole provided by the planner.
3. Slide the drive towards the machine base until the sealing plate
is pressed together to approx. the half thickness.
4. Now tighten the adjustable collar screw with 4 Nm.
The drive is now installed.
Note:
Ensure that the drive and machine base are as
parallel to each other as possible.
INCORRECT
CORRECT
ATTENTION:
Under no circumstances must the drive be
bolted on “hard” without an air gap between it and the
machine. The damping plate is used for tolerance
compensation.
Installing a drive with solid circular shaft
The drive is installed on the axle to be driven using a coupling and
an intermediate flange.
Install the drive according to the coupling
manufacturer’s
specifications.
Example:
The dimensions of your device can be found in the current data
sheet on the website:
www.halstrup-walcher.de/technicaldocu
Please search for “PSD” or “PSC”, select your type, click on “Data
sheets” and download the file.
