halstrup-walcher PS*3**EIP series, Инструкция по эксплуатации

Страница: 13 / 35

Instruction Manual PSx3xxPN
13
Name Par.
Number Function Type/
Range Back
up Delivery
State R/W
Parameter group “position settings” (continued)
referencing
value 40 correction factor for the target, actual and
limit switch values
Changes only possible when at standstill

31 bit
yes 0 R/W
upper
mapping end 41 definition of the positioning range relative
to the absolute measuring system
permissible values:
(actual position value + 3 revolutions)
…
(actual position value + 253 revolutions)
Changes only possible when at standstill

31 bit
yes 102400 R/W
upper limit 42 maximum permitted target position
minimum value:
upper mapping end - 253 revolutions
maximum value:
upper mapping end - 3 revolutions
Changes only possible when at standstill

31 bit
yes 101200 R/W
lower limit 43 minimum permitted target position
minimum value:
upper mapping end - 253 revolutions
maximum value:
upper mapping end - 3 revolutions
Changes only possible when at standstill

31 bit
yes 1200 R/W
positioning
window 44 permissible difference between target and
actual values for “position reached” bit
value in 1/100 mm (for a 4mm spindle and
default settings of numerator and
denominator)
The maximum value that can be set
changes according to the same factor as
the resolution.
Changes only possible when at standstill 1...100
16 bit yes 2 R/W
length of loop 45 minimum number of increments which the
drive moves in a pre-defined direction
when approaching a target position
value in increments (value = 0

no loop)
Changes only possible when at standstill
-1...1
rotation

31 bit
yes -250 R/W
drag error 46
maximum drag error before the “drag
error” bit is set.
value in 1/100 mm (for a 4mm spindle and
default settings of numerator and
denominator)
0...1000
16 bit yes 0 R/W
readjustment 47 readjustment at standstill
0

off; 1

on
0 or 1
16 bit yes 0 R/W
drag error
correction 48 maximum modification of the target speed
for drag error correction
Changes only possible when at standstill 0...10
16 bit yes 4 R/W