background image

The HaloLog app allows logged data to be sent to any email address  for reports, archiving and 
data back-up.

*

 

ACTION

: Tap 

Select the range of HaloLog ID’s for download by either manually specifying the starting 
and ending ID# or use pre-select buttons to choose a particular selection. The iDevice will 
remember the ID# of the “last sent” for each HaloFogger.

 

ACTION

: Tap on the e-mail addresses to which data is to be sent . For convenience,  

 

the last e-mail entered address will be displayed by the iDevice. 

Tap 

 

 

 

 

 

to enter new email address. 

A keyboard will appear to enter address.

 

ACTION

: Tap 

                 to email data. 

 

The iDevice’s email screen will open to confirm message. 

 

ACTION

: Tap SEND in upper right corner of screen to send message. 

Back-up data from the HaloFogger® regularly by sending your data by e-mail to a secure 

address. Regular back-ups are the best and only protection against hardware failures.

To remove the DELETED identifcation from a Run Event

 

ACTION:

 Tap on the 

RED

 highlighted Run Event

 

ACTION:

 Tap  

   

  

A confirmation window will appear. Tap ‘Ok” to continue. 

The 

RED

 highlight and word 

DELETE

 are removed. 

Tap  

 

      to return to Run Event Screen. 

UnDelete

Done

Email Screen

Send Now

Email

Touch here to enter email address #1

HaloFogger®  EXT Operation Manual_1911

Содержание HaloFogger EXT



















Отзывы: