2. Assembly
(5.) Now mount the antennas to the antenna clamps with the cross
screws. Guide the antenna connections through the opening of the an-
tenna clamp (cable not shown in graphic).
You can vary between different positions per antenna. For use with 4G
LTE 2x2 MIMO we recommend to mount the antennas cross-polarized
(-45° / +45°).
1.
2.
3.
4.
Assemble all parts as described in the pictures. Whenever you make a
connection make sure to fit the washers first, then the spring washer and
finally the nut.
First start with the antenna clamps (1. & 2.) and then attach the antenna
clamp as well as the mast bracket (mast diameter: 35-60mm) (4.) to the
buffalo pipe (3.) so that all fastening parts are attached to the buffalo
pipe (3.).
5.
