Halma Ocean Optics DH-3PLUS-CAL, Инструкция по установке и эксплуатации

Страница: 22 / 31

3: Operating Instructions
14 355-00000-003-01
Manually set the operating mode of the DH-3PLUS with the Shutter Switch as follows:

OPEN - Shutter open

CLOSE - Shutter closed

TTL
– Remote operation of shutter
Remote Operation of the LAMP and Shutter
For remote operation, plug the D-SUB 15-pin connector into the appropriate socket on your
spectrometer.
USE ONLY THE CABLE PROVIDED OR A CUSTOM CABLE DESIGNED TO INTERFACE
WITH THE PINOUTS AS DESCRIBED IN THE PINOUT INFORMATION SECTION. DO NOT
USE A VGA VIDEO CABLE.

Set the front panel shutter switch to the TTL position

Pin 2 of the connector is the Deuterium LAMP ON/OFF control.

Pin 3 of the connector is the Halogen LAMP ON/OFF control.

Pin 13 of the connector is the shutter control. (HIGH=OPEN, LOW=CLOSE)
Refer to Pinout Information for information on the operation of lamp and shutter.
Shutter Switch