Hallman HRBIAF18PR, Руководство по установке

Страница: 7 / 92

Confidential
7
Installation place
You must follow the instructions below:
•
The floor on which the product will be installed must be capable of bearing 1,200 pounds (544 kg) minimum.
•
Kitchen floor and the bottom of the product must be at the same level. Otherwise, problems may occur with
the air suction of the product.
•
There must be no objects preventing the installation of the product at the back and on the side walls of the
product's installation place.
•
The power socket must be at the correct place.
•
Dimensions of the furniture where the product will be installed must be in strict conformity with the
dimensions given in the manual.
•
Do not install the product with the fridge and the freezer are adherent next to each other. Otherwise,
condensation and damage may occur in the product. (Please see "Dual Cabin Installation" for detailed
information)
•
Flatness of the floor where the product will be installed must be checked with a Bubble Level Tool.
•
Installation area must not be subjected to direct sunlight and it must be away from heat sources, ovens,
radiators etc.
•
The ambient temperature must be between 55°F (13°C) and 110°F (43°C). Otherwise,
function errors may arise when the product is running.
•
If it is not possible to avoid installing the product near a heat source, the minimum clearances given
below must be maintained between the product and the said source:
-
11/4" (3 cm) from electric hobs or ovens
-
12" (30 cm) from gas or fuel operated hobs or ovens
Please observe the following rules:
•
The power socket or fuse must be easily accessible in case of an emergency;
it must not be hidden behind the product.
•
Plug or cable must not touch the back surface of the product. Otherwise,
it may get damaged due to the vibration of the product.
•
Do not connect the plugs of other appliances behind this product.
If the humidity level is high where the product is used, corrosion may be seen
on the outer surface of the product.
Keep the installation room dry and well-cleaned to avoid corrosion.