7
7
3.7 BACKREST HEIGHT ADJUSTMENT
At the purchase time the backrest height has been selected but further adjustments are still
available:
•
lift-up the front side of the backrest upholstery and open the velcro straps;
•
remove the screws A and B releasing the backrest tubes;
•
move up or down them according with your wish (the tubes are pre-holed with
steeps of 2 cm);
•
replace and tighten the screw A and B;
•
close the Velcro straps;
•
fold-down the upholstery.
3.8 FOOTREST HEIGHT ADJUSTMENT
The foot-rest holding tube is slide into the wheelchair front frame and tightened by the two
fixing screw in the back of the pipe frame.
•
Loose and remove completely the two screws A;
•
slide the foot-rest at the height required;
•
insert and tight the screws A.
