28
Command:
gblayout --auto n
2.3.10
gblayout --list
Command
gblayout --list
Response
The HT-MERCURY outputs a list of every possible layout with its
corresponding number and name.
Description
The command lists all screen layouts in the device.
Example:
To list all screen layouts
Command:
gblayout --list
Response:
Layout #
Name:
0x100 layout0
0x101 layout1
2.4
Event Commands
Event commands are not API commands that can be sent by the controller. These are
messages sent by the HT-MERCURY to announce that a certain state of the device
has changed.
2.4.1
[Event] VideoSource
Command
[Event] VideoSource
VideoName
{ NoSignal | {
VideoTiming
{ YUV444 |
YUV422 | RGB888 | MJPEG | H.264 | H.265 }}
Description
This message means that the state of one video source has changed
and has two parts to it. The first is the name of the video source with
the changed state. The second part varies on the new state:
Ø
If the video source has lost signal, a word
NoSignal
is used as
the second argument.
Ø
If the video source is connected, the second and third parts
provide the timing and format respectively.
Example:
HDMI lost signal
Message:
