Hall Technologies May 24, 2023
Page 7 of 13
HT-AIM-100-RX REAR PANEL
No.
Name
Description
1
POWER
DC 18V power supply. (Only one side needs to be powered.)
2
HDBT IN
HDBaseT input, connected to the transmitter output via Cat5e/6/7 cable.
3
IR IN
Connect to the IR Receiver Cable (Signal is sent to the AIM-100-TX IR OUT).
4
IR OUT
Connect to the IR Emitter Cable (Signal is sent to the AIM-100-TX-IR IN).
5
RS232
For RS-232 pass-through.
6
HDMI OUT
Connect to an HDMI display device.
7
ETHERNET
Connect to a LAN network.
8
MODE
Normal:
•
RS-232 signals can be transmitted as pass-through signals.
•
Transmitter cannot be updated.
Update:
•
RS-232 signals cannot be transmitted.
•
Transmitter can be updated.
